SafeBOT
Coast Series Boat Cover for 17–19 ft Boats
The Safeboatz Coast Series boat cover fits 17–19 ft hulls up to 96 inches wide. See how the detachable buckle straps work and check your boat’s fit.
Quick-release buckles at the ramp
Unclip the eleven side-release buckles to lift the Coast cover off your boat. Leave the blue straps threaded through their loops for next time, or remove them to store separately.
$99.99 USD
17–19 ft
Hull length
96 in
Maximum beam
900D
Polyester fabric
Details
Check your hull and beam
Measure from bow to stern along the hull, then straight across its widest point. A tall windshield or console takes up fabric. Check that the hem can reach both sides of the hull.
Removable buckle straps
Thread a strap through its sewn fabric loop, route it around the trailer frame and close the side-release buckle. Adjust both sides in stages so the cover sits evenly from bow to stern.
Vents, hem and reinforced corners
The elastic hem follows the lower edge of the hull. Reinforced corners protect the fabric where it bends, and the two vents allow air underneath. Give the cover a slope over the cockpit so rain can run off.
Specifications
| Specification | Product details |
|---|---|
| Hull fit | 17–19 ft long, up to 96 in at the widest point |
| Tie-down system | 11 removable straps with plastic side-release buckles |
| Fabric | PU-coated 900D polyester with taped inner seams |
| Orientation | One FRONT label at the bow and two REAR labels at the stern |
| Storage | One 29 × 17 × 29 in bag that also fits over an outboard motor |
Common questions
What protects the boat during storage?
The black 900D polyester has a polyurethane coating and taped inner seams. Two vents let air circulate under the cover. Support low spots so rain can run off instead of collecting in a pocket.
Is there a separate motor cover?
One bag does both jobs: it stores the folded cover or slips over an outboard while the cover is in use. It measures 29 × 17 × 29 inches. Compare those dimensions with your motor before using it as a cover.
How does it differ from Vault?
Both covers fit the same hull length and beam. Choose Coast if you prefer to unclip and remove the straps. Vault keeps its straps sewn to the cover and uses gated metal S-hooks.